Kā novērst Ubisoft pakalpojumu pašlaik nav pieejams & rsquo; Kļūda sistēmā Windows?

Mēģinot palaist Ubisoft, Uplay parāda kļūdu “Ubisoft pakalpojums pašlaik nav pieejams”. Uplay tiek izmantots, lai pārvaldītu digitālo izplatīšanu, DRM, multiplayer un sakarus Ubisoft spēlēm, un tā ir svarīga katras Ubisoft spēles sastāvdaļa. Kļūda parādās, mēģinot sākt spēli vai pieteikties datorā Uplay.

Par laimi, daudzi lietotāji datoros ievietoja metodes, kuras viņi izmantoja, lai atrisinātu problēmu. Mēs esam snieguši soli pa solim instrukcijas par šīm metodēm, tāpēc pārliecinieties, ka tās rūpīgi ievērojat un, cerams, atrisiniet radušos problēmu!

Kas izraisa Windows kļūdu “Ubisoft pakalpojums pašlaik nav pieejams”

Šai problēmai var piedēvēt diezgan daudz dažādu cēloņu, un mēs iesakām iepazīties ar sarakstu, kuru esam sagatavojuši zemāk. Pareiza pareiza norādīšana var palīdzēt ātrāk izvēlēties pareizo problēmu novēršanas metodi. Veiksmi!

  • Laiks un datums ir iestatīti nepareizi - jums jāpārliecinās, vai datorā ir pareizi konfigurēti laika un datuma iestatījumi. Gandrīz visi tiešsaistes pakalpojumi ir atkarīgi no laika un datuma, lai tie tiktu pareizi iestatīti. Skatiet, vai tas problēmu atrisina.
  • Notiek lauzts process - ProgramData ir dīvaini izpildāms nosaukums, kas darbojas katru reizi, kad sākas spēle. Tā beigšana var atrisināt problēmu, tāpat kā daudziem lietotājiem!
  • Hamachi - lietotāji, kuru datorā ir instalēta Hamachi, ziņoja, ka problēma vairs nerodas, tiklīdz viņi ir atinstalējuši Hamachi.
  • IPv6 - šķiet, ka problēma parādās tikai tad, ja savienojumam tiek izmantots IPv6 protokols. Pāreja uz IPv4 var viegli atrisināt problēmu.
  • Tīkla problēmas - problēmas ar dažādiem tīkla iestatījumiem datorā var atrisināt vairākos veidos: atiestatot resursdatora failu, veicot tīkla atiestatīšanu vai piešķirot statiskas IP un DNS adreses.

1. risinājums: datorā pārbaudiet laiku un datumu

Izmantojot Ubisoft un Uplay tiešsaistes pakalpojumus, ir pašsaprotami, ka laiks un datums datorā ir iestatīts pareizi. Šis ir standarts, ko izmanto, lai novērstu dažādas drošības problēmas, un jums ir jādara pareizi iestatījumi. Izpildiet tālāk sniegtos norādījumus, lai pareizi iestatītu laiku un datumu datorā!

  1. Atveriet Windows 10 iestatījumus, atverot izvēlni Sākt un atverot iestatījumu rīku, noklikšķinot uz zobrata ikonas izvēlnes Sākt apakšējā kreisajā stūrī.
  2. Varat arī izmantot Windows taustiņu + I kombināciju, lai tieši atvērtu iestatījumus. Noklikšķiniet, lai atvērtu sadaļu Laiks un valoda, un pārejiet uz cilni Datums un laiks kreisās puses navigācijas izvēlnē.
  1. Jo Datums un laiks cilni, pārliecinieties, ka jūsu datora datums un laiks ir iestatīts pareizi. Ja laiks nav pareizs, varat mēģināt ieslēgt vai izslēgt opciju Iestatīt laiku automātiski atkarībā no pašreizējā stāvokļa.
  1. Lai mainītu datumu, sadaļā Datums noklikšķiniet uz nolaižamās izvēlnes pogas, lai kalendārā atrastu pašreizējo mēnesi, un pēc tam noklikšķiniet uz pašreizējā datuma.
  2. Lai mainītu laiku, sadaļā Laiks noklikšķiniet uz stundas, minūtes vai sekundes, kuru vēlaties mainīt, un pēc tam bīdiet vērtības, līdz esat norēķinājies par pareizo atbilstoši jūsu laika joslai.
  3. Kad esat pabeidzis mainīt laika iestatījumus, noklikšķiniet uz Labi .

Alternatīva : cilvēki, kuriem neizdevās novērst problēmu, šādi pielāgojot iestatījumus, to var izdarīt arī vadības panelī. Iestatījumi ir līdzīgi, taču tagad jūs varat iestatīt savu laiku sinhronizēšanai ar interneta laiku.

  1. Atveriet vadības paneli , meklējot to pogā Sākt vai noklikšķinot uz meklēšanas vai pogas Cortana uzdevumjoslas kreisajā daļā (ekrāna kreisajā apakšējā daļā). To var arī atvērt, izmantojot Windows Key + R taustiņu kombināciju , lodziņā Run (Palaist) ierakstot “ control.exe ” un noklikšķiniet uz Labi, lai palaistu Vadības paneli .
  2. Pēc vadības paneļa atvēršanas mainiet skatu uz Lielas vai Mazas ikonas un pārejiet pa logu uz leju, lai atvērtu opciju Datums un laiks . Cilnē Datums un laiks augšdaļā noklikšķiniet uz pogas Mainīt datumu un laiku, un jūs varat to iestatīt šeit.
  3. Alternatīvi, varat izvēlēties sinhronizēt laiku ar tiešsaistes laika serveri, veicot šīs darbības. Logā Datums un laiks dodieties uz cilni Interneta laiks un noklikšķiniet uz Mainīt iestatījumus Atzīmējiet izvēles rūtiņu blakus opcijai Sinhronizēt ar interneta laika serveri un noklikšķiniet uz pogas Atjaunināt tūlīt . Pēc tam noklikšķiniet uz Labi, Lietot, Labi un aizveriet Vadības paneli.
  4. Kad esat pabeidzis iepriekš minētās darbības, problēma ir jānovērš.

2. risinājums: pabeidziet kļūdainu procesu uzdevumu pārvaldniekā

Ir zināms bojāts fails, kas darbojas no ProgramData. Tas pieder Ubisoft, taču tas bieži tiek sabojāts un neļauj lietotājiem vispār atvērt utilītu. Tā nosaukums visiem nav vienāds, taču uzdevumu pārvaldniekā to atpazīsit kā pilnīgi nesaistītu burtu virkni. Lai pabeigtu šo uzdevumu, veiciet tālāk norādītās darbības!

Atveriet Uplay vai Ubisoft spēli un gaidiet ekrānu, kurā tiek lūgts ievadīt akreditācijas datus. Parādīsies kļūda “Ubisoft pakalpojums pašlaik nav pieejams”.

  1. Izmantojiet taustiņu kombināciju Ctrl + Shift + Esc , vienlaikus nospiežot taustiņus, lai atvērtu utilītu Uzdevumu pārvaldnieks.
  2. Alternatīvi, jūs varat izmantot taustiņu kombināciju Ctrl + Alt + Del un uznirstošajā zilajā ekrānā atlasīt Uzdevumu pārvaldnieks, kas parādīsies ar vairākām opcijām. To var meklēt arī izvēlnē Sākt.
  1. Noklikšķiniet uz Papildu informācija loga apakšējā kreisajā daļā, lai izvērstu uzdevumu pārvaldnieku. Palieciet Procesi Ritiniet uz leju, līdz nonākat Fona procesu sarakstā, un meklējiet failu, kura nosaukums ir līdzīgs zemāk esošajā fotoattēlā redzamajam.
  2. Atlasiet to un loga apakšējā labajā stūrī izvēlieties opciju Beigt uzdevumu .
  1. Apstipriniet visus dialoglodziņus, kas var parādīties, mēģinot pabeigt uzdevumu, un pārbaudiet, vai tagad datorā varat pieteikties Uplay!

3. risinājums: atinstalējiet Hamachi

Hamachi lietošana ir īpašs iemesls dažiem lietotājiem. Tas ir problemātiski, jo lietotājiem ir jāizvēlas starp abām programmām. Tomēr Uplay ir svarīgāks, tāpēc jums vajadzētu apsvērt iespēju kādu laiku atinstalēt Hamachi, lai redzētu, vai problēma ir atrisināta. Izpildiet tālāk sniegtos norādījumus!

  1. Noklikšķiniet uz izvēlnes Sākt pogas un atveriet vadības paneli , to meklējot. Varat arī noklikšķināt uz zobrata ikonas, lai atvērtu iestatījumus, ja izmantojat Windows 10.
  2. Vadības panelī augšējā labajā stūrī atlasiet Skatīt kā - kategoriju un sadaļā Programmas noklikšķiniet uz Atinstalēt programmu.
  3. Ja izmantojat lietotni Iestatījumi, noklikšķinot uz Lietotnes , nekavējoties jāatver visu datorā instalēto programmu saraksts.
  4. Vadības panelī vai iestatījumos atrodiet rīku LogMeIn Hamachi un noklikšķiniet uz Atinstalēt . Atveras tā atinstalēšanas vednis, tāpēc izpildiet norādījumus, lai to atinstalētu.
  5. Kad atinstalētājs ir pabeidzis procesu, noklikšķiniet uz Pabeigt un restartējiet datoru, lai redzētu, vai joprojām parādās kļūdas.

4. risinājums: atspējojiet IPv6

Atspējojot datora interneta protokola 6. versijas savienojamību, problēma tika atrisināta daudziem lietotājiem, un tas ir vienkāršs veids, kā problēmu novērst. Tas padara šo metodi cienīgu, un problēmu novēršanas laikā to nevajadzētu izlaist.

  1. Izmantojiet Windows + R taustiņu kombināciju, kurai nekavējoties jāatver dialoglodziņš Palaist, kur joslā ierakstiet “ ncpa.cpl ” un noklikšķiniet uz Labi, lai vadības panelī atvērtu vienumu Interneta savienojuma iestatījumi.
  2. The same process can also be done by manually opening the Control Panel. Switch the View by setting at the top right section of the window to Category and click on Network and Internet at the top. Click the Network and Sharing center button to open it. Try to locate the Change adapter settings button at the left menu and click on it.
  3. When the Internet Connection window opens, double-click on your active Network Adapter.
  4. Then click Properties and locate the Internet Protocol Version 6 entry on the list. Disable the checkbox next to this entry and click OK. Restart your computer to confirm the changes and check to see if the problem persists.

Solution 5: Use Static IP and DNS Addresses

By default, IP and DNS address of your computer change over time. This is usually not problematic but users have reported that assigning static IP and DNS addresses to your computer can help you resolve the “A Ubisoft service is currently unavailable” error on Windows. Follow the steps below to try out this method!

  1. Make sure you open a Command Prompt window by searching for “cmd” or “Command Prompt” in the Start menu.
  1. Type in the command which will be displayed below and scroll down towards the network adapter which corresponds with the connection you are using. Take note of Default Gateway, Subnet Mask, MAC and DNS
ipconfig /all
  1. After that, use the Windows + R key combo which should immediately open the Run dialog box where you need to type ‘ncpa.cpl’ in the bar and tap OK to open the Internet Connection settings item in Control Panel.
  1. Left-click your active network adapter and click on the Properties Locate the Internet Protocol Version 4 (TCP/IPv4) item on the list. Tap on it to select it and click the Properties button below.
  1. Stay in the General tab and switch the radio button in the Properties window to “Use the following DNS server addresses” and use 8.8.8 and 8.8.4.4 respectively. Switch to “Use the following IP address” and use the same number as the Default Gateway you took note of but change the last digit after the last dot so something else. Fill out other information the same as you took note.

Solution 6: Completely Reset Your Hosts File

The host’s file is an important file when it comes to networking issues. Resettings it can resolve many different problems, including the “A Ubisoft service is currently unavailable” error. If for some reason, you find that your hosts file has been compromised or if you start experiencing this problem with Origin, you can reset the file back to default by following the steps below.

  1. Navigate to the location C >> Windows >> System32 >> Drivers >> Etc by navigating to it after opening the File Explorer. First, click This PC or My Computer from the left side pane to locate and open your Local Disk C.
  2. If you are unable to see the Windows folder, you may need to turn on the option which enables you to see hidden files and folders. Click the “View” tab in File Explorer’s top menu and click the “Hidden items” checkbox in the Show/hide File Explorer will show the hidden files and will remember this setting until you change it again.
  3. Locate the hosts file in the Etc folder, right-click on it, and choose to Open it with Notepad. Use the Ctrl + A key combination to select all text and click Delete or Backspace to delete it. After that, paste the following text inside:
# Copyright (c) 1993-2006 Microsoft Corp. # # This is a sample HOSTS file used by Microsoft TCP/IP for Windows. # # This file contains the mappings of IP addresses to hostnames. Each # entry should be kept on an individual line. The IP address should # be placed in the first column followed by the corresponding host name. # The IP address and the host name should be separated by at least one # space. # # Additionally, comments (such as these) may be inserted on individual # lines or following the machine name denoted by a '#' symbol. # # For example: # #      102.54.94.97     rhino.acme.com          # source server #       38.25.63.10     x.acme.com              # x client host # localhost name resolution is handled within DNS itself. #       127.0.0.1       localhost #       ::1             localhost
  1. Click File >> Save to save the changes. Exit Notepad and restart your computer. Check to see if the problem persists regarding Ubisoft to log in properly.

Solution 7: Use SFC to Scan for Missing or Corrupt System Files

Networking issues can often by system-related. These problems are rooted deep inside the system files and the only way to try to resolve them is by running the System File Checker (SFC). It will scan your system files for errors and possible repair or replace them. Follow the steps below to do so!

  1. Search for “Command Prompt” by typing it either right in the Start menu or by pressing the search button right next to it. Right-click the first entry which will pop up as a search result and select the “Run as administrator” context menu entry.
  2. Additionally, you can also use the Windows Logo Key + R key combination to bring up the Run dialog box. Type in “cmd” in the dialog box which appears and use the Ctrl + Shift + Enter key combination for admin Command Prompt.
  1. Type in the following commands in the window and make sure you press Enter after typing each one. Wait for the “Operation completed successfully” message as an indication that our message was successful.
sfc /scannow
  1. Try to restart your computer and check to see if the “A Ubisoft service is currently unavailable” error continues to appear on your computer.

Solution 8: Perform a Network Reset

Performing a Network Reset is yet another simple method of resolving this problem and it’s the last one in our list. It has worked for many users and you have absolutely nothing to use if you try it out. Follow the steps below and check to see if the “A Ubisoft service is currently unavailable” error continues to appear on your computer.

  1. Open the Run utility by using the Windows Key + R key combination on your keyboard (press these keys at the same time. Type “ms-settings:” in the newly opened box without the quotation marks and click OK to open the Settings tool.
  2. An alternative way would be to open the Settings tool on your PC by clicking the Start menu and clicking the cog icon at the bottom left part.
  3. Also, you can use the Windows key + I key combination for the same effect. Click to open the Network & Internet section and stay in the Status tab at the left side of the window.
  4. Scroll down until you reach the blue Network reset button. Click it and follow the instructions which will appear on-screen and make sure you comply with everything.
  5. Check to see if the same problem persists!